|
|
|
DISCOUNT SCOOTERS AND PARTS! SALES SINCE 1988. SEE PHONE NUMBERS AT THE BOTTOM OF THE PAGE
| Popular Electric and Gas Motors |
 |
 Universal 24V 100 Watt Belt or Chain Drive Motor $44.95
plus shipping and handling
Generic replacement 100 watt motor for model X-10 and Razor. Comes complete
with 3M pitch belt hub, 12mm wide, or #25H Chain Sprocket (not interchangeable between belt or chain version). This item will fit in most other name brand scooters that have a 100 watt motor
installed. 3300 rpm, 2700 with load. Rated Torsion: 0.35. 3 pounds. (2 3/4" Diameter, 3
3/4" long, 4.85" long including Shaft)
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
OEM 24V 100 Watt Belt or Chain Drive Motor $59.95
plus shipping and handling
OEM replacement 100 watt motor for model X-10 and Razor. Comes complete
with 3M pitch belt hub, 12mm wide, or #25H Chain Sprocket (not interchangeable between belt or chain version). This item will fit in most other name brand scooters that have a 100 watt motor
installed. 3300 rpm, 2700 with load. Rated Torsion: 0.35. 3 pounds. (2 3/4" Diameter, 3
3/4" long, 4.85" long including Shaft)
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
 200 Watt 24 Volt Belt or Chain Drive Motor $49.95
plus shipping and handling
2750 RPM @ 24V 11.5A. Approximate 4" Diameter, 3" Wide, 4" Wide including
Shaft, HTD 5M15 Pitch/width belt hub or 11 tooth #25 chain sprocket choice. For all scooters in the 150-200 watt range. Uses the common 4 tap hole flange - Mount Picture. This motor is rated at 2750
RPM, 24 Volt, 11 amps. 4 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
250 watt 24 Volt Belt or Chain Drive Motor $54.95
Plus Shipping and handling.
250 watt, 24 volt, 10.5 amp, 2650 RPM. Comes complete with sprocket
and bracket attached with four hole tapped mount. This item will
fit in most other name brand scooters and X-treme X11 or X250 and Razor. 4 tap hole flange -
Mount Picture.
Approximate Dimensions: 4" Diameter x 3 1/4" Long, 4 1/2 long including shaft. 4 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
24V 350 Watt Chain Drive Motor with
Mounting Bracket (4 bolt) $79.95
plus shipping/handling
Hard to find, but a perfect 350 watt permanent magnet performance
motor comes complete with 11 tooth sprocket for #25 chain. This
item will fit in most name brand scooters that allow installation
or replacement of a four tapped hole bracket mounted motor,
replacing 200 watt to 350 watt chain drive installed motors. -
Picture. This motor is rated at
approximately 2650 RPM, 24 Volt, 19 amps. 6 pounds. (4" Diameter, 4" Wide, 5" Wide including Shaft)
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
36V 350 Watt Chain Drive Motor with
Mounting Bracket (4 bolt) $89.95
plus shipping/handling
Hard to find, but a perfect 350 watt permanent magnet performance
motor comes complete with 11 tooth sprocket for #25 chain. Produces a
600 watt output in torque and power. This bracket mounted motor
will fit in most name brand scooters that allow installation
or replacement of a four tapped hole bracket mounted motor,
replacing 200 watt to 350 watt chain drive installed motors. -
Picture. This motor is rated at
approximately 2650 RPM, 36 Volt, 15 amps. X-treme X360 OEM Part. 6 pounds. (4" Diameter, 4" Wide, 5" Wide including Shaft)
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
500 WATT 24 VOLT MOTOR $109.95
plus shipping/handling
500 watt, 24 volt, 27.5 amp, 2750 RPM. 4.375" Diameter, 5.75" Wide,
6.75" Wide including Shaft. Comes complete with 11 tooth sprocket for #25
chain. This item will fit in most other name brand scooters that
have a similar size chain drive motor installed. Available with or without mounting bracket.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
500 WATT 36 or 48 VOLT MOTOR $109.95
plus shipping/handling
The 500 watt, 36 volt motor is rated at 18.3 amp, 2500 RPM (windings can safely be
reduced to increase RPM). 4.25" Diameter, 5.5" Wide, 6.5" Wide
including Shaft. Comes complete with sprocket for #25 chain. The OEM 500 watt 48 volt motor is 4.25" Diameter, 5.5" Wide, 6.5" Wide including
Shaft. Comes complete with sprocket for #25 chain. A powerful motor
with low amps at 48 volts. Used in the X-500 X-treme Scooter. 15 pounds. These band mounted motors will
fit in most other name brand scooters that have a similar size
chain drive motor installed.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
750 WATT 24 VOLT MOTOR $149.95
plus shipping and handling
24V 750W Motor, Rated Speed: 2600R/MIN, Rated Current: 28 AMP, 11 Tooth #25/25H Sprocket, Shaft Diameter: 10mm, 2-pin male Plug, Wire Length: 26 inches, Outer Diameter (motor): 101mm or 4 inches, Overall Length (including shaft): 109mm. Model: XYD-6B as used on Currie Scooters and other makes and models with flange or band mount.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
750 watt 36 Volt Motor, Chain Drive Motor $159.95
plus shipping and handling
2800 rpm, 27 amp, permanent magnet motor, 12 guage motor leads, 11
tooth sprocket for #25 chain. Dimensions: 4-1/4" W x 5-1/2" L not
including shaft. 4-1/2" W x 6-1/2" L including shaft.
Band Mounted Motor where the band is mounted to the frame of the
scooter; also has two tapped holes for bolting on each end. ADD $10 TO ORDER THIS MOTOR WITH ATTACHED MOUNTING BRACKET
using the ADD TO CART BUTTON below.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
1000 watt 36 Volt Motor, Chain Drive Motor $169.95
plus shipping and handling
36 Volt, 1000 Watt, 3000 RPM, 35 Amp, permanent-magnet motor. 12
gauge power leads. Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft. Shaft is 15/32 diameter. Sprocket
included is for 8mm T8F chain. Order #25 chain double D motor sprocket
here. 11 pounds. Also available
with attached mounting bracket for $10. Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.
Mounting holes 4'' center to center across and 2-1/4'' center to center across.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
1000 watt 48 Volt Motor, Chain Drive Motor $174.95
plus shipping and handling
48 Volt, 1000 Watt, 3000 RPM, 27 Amp, permanent-magnet motor. 12
gauge power leads. MY1020. Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft. Shaft is 15/32 diameter. Sprocket
included is for 8mm T8F chain. Order #25 chain double D motor sprocket
here. 11 pounds. Also available
with attached mounting bracket for $10. Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.
Mounting holes 4'' center to center across and 2-1/4'' center to center across.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
Brushless Motor in Rear Wheel Hub for Pantera, etc, 750 watt 48 Volt Motor $179.95
plus shipping and handling
750w rear motor-wheel assembly for full-size, 48v electric scooters. 750 watt rear hub motor assembly. Includes wheel rim, hub motor and wiring. Specifications: Tire size 3.00 - 10, 5 Pin Connector, 3 single pin wires blue, green, yellow. Supported Models - Various unlisted makes/models like Panterra (Freedom electric), Panterra (Fusion electric), Panterra (Retro Electric), X-Treme. 30 pounds.
MATCHING CONTROL BOX (as available)
48 VOLT TO 12 VOLT CONVERTER
3.00-10 TIRE AND/OR TUBE
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
49/50cc Engine Electric Start
with pull start $159.95
plus shipping and handling
OEM 50cc engine that may be used for a large variety of scooter applications.
Engines are brand new and not refundable or returnable. Transmission sold separately
or purchase engine and transmission together and save! OEM X-treme.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
49/50cc Engine with Transmission $239.95
plus shipping and handling
Electric start with additional pull start. Transmission includes snap/keeper ring. Centrifugal Clutch built inside transmission. This item fits many other brands of scooters. Engines are brand new and not refundable or returnable. OEM X-treme.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
Transmission Sold Separately $79.95
plus shipping and handling
Transmission For XG-499/XG-505/XG-550 with attachment retaining clip. Centrifugal Clutch built inside. This item fits many other brands of scooters.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
PULL START FOR 47CC, 49CC, 50CC ENGINES $19.95
plus shipping and handling
Replacement pull starter complete. Fits our XP-490, XG-470, XG-499, XG-505,
& XG-550 & ALL other brands that use a pull starter that
looks like the one pictured for 33 - 50cc engines. Most popular.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
UPGRADED PULL START FOR 47CC, 49CC, 50CC ENGINES
$56.95
plus shipping and handling
Metal Upgraded, higher quality, pull starter reduces wear and breakage for 33 - 50cc engines.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
STARTER PAWL (A)
STARTER PAWL FOR CUP (B)
STARTER PAWL ENGAGER (C)
$6.95 Each
plus shipping and handling
Starter pawl parts for 33 - 50cc engines. Most common types!
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
CLICK FOR LARGER IMAGE
CARBURETOR FOR 43CC, 49CC ENGINES
$29.95
plus shipping and handling
Carburetor used on 43cc and 49cc scooter engines commonly found on stand-up gas scooters, pocket bikes, mid/super pocket bikes, mini-choppers as well as some small ATVs and dirt bikes. Venturi Side Opening: 15mm, Bolt Hole Spacing: 31mm, Low speed adjustment, Air Fuel mixture adjustment. No returns, exchange, or allowance provided.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
11 TOOTH SPROCKET - $9.95
Plus Shipping/Handling
11 and 13 tooth sprocket for motors. 13 tooth double-D is 1 1/2 diameter for increased speed, Outer Diameter: 1-1/2" / 38mm, Inner Diameter: 0.3937", 10mm shaft, fits most MY1020 style electric scooter motors. 11 tooth double-D is 1 inch diameter. Outer Diameter: 25.5mm, Inner Diameter (flat edge to edge): 8.6mm for 10mm shaft, fits most MY1020 style electric scooter motors. 11 Teeth D is Outer Diameter: 25mm, Fits 8mm shaft, fits most MY1016 style electric scooter motors for X-Treme, SUNL, Various unlisted makes/models, Roketa, Terminator, Boreem Jia, E-scooter, Electra Scoot-N-Go, Freedom models. #25 or #25H chain.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
9 TOOTH BICYCLE SPROCKET - $13.95
Plus Shipping/Handling
9 tooth D bicycle chain sprocket for MY1016 motors. Outer Diameter: 1-5/8'' / 41mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1016 series of motors that have a 10mm single d-bore shaft.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
11 TOOTH BICYCLE SPROCKET - $12.95
Plus Shipping/Handling
11 tooth double D bicycle chain sprocket for motors. Outer Diameter: 1-15/16'' / 48.8mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1020 series of motors that have a 10mm dual d-bore shaft.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
13 TOOTH BELT HUB - $9.95
Plus Shipping/Handling
13 Tooth D-bore Sprocket For 5mm Belts.
This 13 tooth 5mm belt sprocket fits most MY1016 style electric
scooter motors. This sprocket is designed for use with any 5mm
belts up to 15mm in width. Outside Diameter: 25mm (1.0 inches). Inner Diameter: 8mm (0.315
inches)
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order
|
|
|
 FOLLOW THESE INSTRUCTIONS FOR ANY ISSUES
If you need help with any issues the first thing we ask you to do is
contact us via one of the following methods and we can save you time!
We want to help you before extra paperwork and expenses make a possible
easy resolution take weeks, or even months to resolve.
DO NOT CONTACT PAYPAL! Paypal is only a payment processor and an extra layer of paperwork.
You certainly have this option available anytime in the future,
but we can help take the correct steps for fastest resolution.
DO read the emails you have received from us because there is instructions
for the quickest way to proceed based on the type of order you placed.
This is the FIRST step you should take after realizing there is an issue.
Next email reply in that email at the top to tell us what the issue is.
These two simple steps will save everyone time and money!
If you have a technical question there are two ways to proceed.
If you ordered an X-treme OEM Part or Scooter you can get free technical support using the
X-TREME SUPPORT TICKET SYSTEM where you and a specialist dialog
on the website to provide you help and warranty parts support using a ticket number.
OEM Parts primarily come from this same location, too, saving time if a part needs replacing.
If necessary, email us in reply to the email with the subject line OEM PART ORDER SHIPPING.
If you ordered and received one of our pretested universal parts from our own warehouse
then reply to the email we sent with the subject line ORDER SHIPPING.
CURRENT NEWS
See our latest news here.
|
Feel free to CALL or TEXT MESSAGE us using our Parts
and Scooter Information Hotline at...
TEXT 281-317-7307 or CALL 281-997-6907 FOR GENERAL QUESTIONS
Not Answered in our COMMON QUESTIONS FAQ
Or our SALES ONLY Hotline
where we can take Credit Card orders verbally
Note: Verbal Orders are more prone to mistakes so use our Shopping Cart System
1-800-842-1225 ORDER ONLY HELP Monday through Friday
(Phone Order - Or Help using the Shopping Cart System)
High Volume Calls are answered by our
machine and your phone number is logged.
We will call USA customers back when you say CALL ME BACK after the beep!
Best time to call: Mid-Afternoon
Otherwise
EMAIL US for fastest help or if you need a link to a part.
Thanks for shopping with us, we
appreciate your business.
|
|
