When you Click the BUY NOW or ADD TO CART Button you will see the
price with Shipping & Handling for the USA (Email for
International) added to the item price listed. If shipping is free
there will still be a small handling fee. DISREGARD ANY OTHER
PAYPAL SHOPPING CART NOTICES FOR ADDITIONAL SHIPPING! Clicking
the ADD TO CART or BUY NOW button to place an order indicates you
have agreed to the order policy and procedures as printed on this
web site.
To find the size of your tire look on the side.
All pneumatic tires are printed with the entire tire Diameter and
Width information in either standard or metric size. Many scooters
have a wheel rim diameter of 4 inches and it may not be reflected
in the size. If your tire says it is 200 X 50 in metric size then
this is the same as an 8" diameter by 2" width tire (25mm = 1 inch)
with a 4 inch diameter hole for the rim. The inner tube is also the
same size. In some cases a tire might be listed for example as a 10
inch diameter, 2.80-4 or 2.50-4 width, or 2.80/2.50-4 - width of
the tire and a 4 inch diameter rim hole (meaning the rim can accept
widths of either 2.8 or 2.5 inches), or the tire or tube will only
show the 2.80-4 or 2.50-4 on the side of the tire and not the
outside diameter of the tire or tube. A 10 inch tire or tube is the
outside diameter of the tire or tube, usually rounded off to the
nearest inch. The width in inches is the 2.50 or 2.80, and the 4 is
the diameter of the hole for the rim. A 3.00-9 Tire indicates the
width is 3 inches with a rim size of 9 in diameter. 3.00-10 Tire indicates a
width of 3 inches with a rim size of 10 in diameter. The rim size is the
size of the hole in the center of the tire, too. In some cases we list the
physical sizes of the tire or tube diameter in the tire, tube, or
wheel descriptions for your information and comparison, too. With
this comparative information you should not make a mistake in
ordering the correct size. EMAIL US IF YOU ARE IN DOUBT BEFORE YOU ORDER!
SEE OUR TERMS OF SALE, ORDER POLICIES, TO UNDERSTAND HOW TO EXCHANGE!!
When electric scooters first became popular our
Scooter Tubes (Innertubes), Tires (sizes: 12, 10, 9, 8 1/2, 8,
200x50, 2.50-4, 3.00-4, 4.10/3.50-4), Airless (Airfree) Tires,
Bearings (including 6000z, 6001z, 6200zz), Wheels, Rims, Axles and
wheel hardware, and Common Scooter Tire Components were available
for customers in need who otherwise could not get parts for their
model scooters. Bearings for wheels and fork assemblies were hard
to find, and still are for quality parts. The difference in our
selection of tires, tubes, wheels, and parts from others' parts is
that we reject the cheap parts sometimes available to us. Plus, we
test the parts we sell prior to shipping them to our customers,
adding a little bit to the price but insuring quality. And with the
advent of Airless or Airfree tires that prevent freqent maintenance
we found a real timesaver for scooter owners. Bottom line - fast
receipt of quality airless tires, pneumatic tires and tubes, wheel
assemblies, bearings, axles and hardware, for almost all
scooters!
To find the size of your tire look on the side. All pneumatic
tires are printed with the entire tire Diameter and Width
information in either standard or metric size. We list our tires from the
smaller diameter and rim size at the top of this page and becoming larger
as you scroll down the page. Many scooters have a
wheel rim diameter of 4 inches and it may not be reflected in the
size. If your tire says it is 200 X 50 in metric size then this is
the same as an 8" diameter by 2" width tire (25mm = 1 inch) with a
4 inch diameter hole for the rim. The inner tube is also the same
size. In some cases a tire might be listed for example as a 10 inch
diameter, 2.80-4 or 2.50-4 width, or 2.80/2.50-4 - width of the
tire and a 4 inch diameter rim hole (meaning the rim can accept
widths of either 2.8 or 2.5 inches), or the tire or tube will only
show the 2.80-4 or 2.50-4 on the side of the tire and not the
outside diameter of the tire or tube. If these sizes further state it is a 9 or 10 inch tire or tube then this is the
outside diameter of the tire or tube, usually rounded off to the
nearest inch. The width in inches is the 2.50 or 2.80, and the 4 is
the diameter of the hole for the rim. On the other hand a 3.00-9 Tire size indicates the
width is 3 inches with a rim size of 9 in diameter. A 3.00-10 Tire indicates a
width of 3 inches with a rim size of 10 in diameter. The tire outside diameter is not given! The rim size is the
size of the hole in the center of the tire at 9 or 10 inches rounded off. In some cases we list the
actual physical sizes for the tire, tube, or
wheels in the descriptions for your information and comparison, too. With
this comparative information you should not make a mistake in
ordering the correct size. Some tires are listed with the Scooter brand
or make and model to also help your research. EMAIL US IF YOU ARE IN DOUBT BEFORE YOU ORDER!
SEE OUR TERMS OF SALE, ORDER POLICIES, TO UNDERSTAND HOW TO EXCHANGE!!
Rare Tube 6 X 1.25 inch 90 Degree Stem)
Heavy Duty - $8.95
plus shipping/handling
UNIVERSAL SCOOTER TIRE AND TUBE SET, 8 inch (200 x 50), 90 Degree
Stem - $16.95
plus shipping/handling
Quality Front or Rear Use on All ELECTRIC Scooters. Street/turf
tire tread. Actual dimensions 200X50: 7 5/8" diameter, 1 7/8 width,
4 inch diameter center for rim. 36 PSI. Most popular scooter tire
and tube we carry.
Tube 8 inch (200 x 50,
original 90 Degree Stem) Heavy Duty - $5.95
plus shipping/handling
200 x 50 Actual dimensions: 7 5/8" diameter, 1 7/8 width, 4 inch
diameter center for rim. 90 degree
typically used Stem innertube. IMMEDIATE SHIPPING! TIP ON CHANGING A BAD INNERTUBE
AIRLESS TIRE 8 inch SCOOTER TIRE (200 x
50 metric), for Front or Rear Use OUT OF STOCK
plus shipping/handling Availability of this
item? OUT OF STOCK!.
Highest Quality Airless tire. Price increasing rapidly due to
cost of rubber and oil based products.
Actual dimensions: 7 5/8" diameter, 1 7/8 width, 4 inch diameter
center for rim. Never have flats again! This is NOT a hard rubber
or plastic tire that will wear out and get flat spots! This is a
soft, but long life tire like automobiles use, filled with a new
composite type (replaces old foam type) material that has been
tested extensively, a heavy duty tire for both front or rear tire
replacement. The best flat-free tire ever produced for ELECTRIC and
GAS SCOOTERS. Rides like pneumatic air filled tires, but won't go
flat or need air ever!!! Not the same plastic composite tire sold
elsewhere for less! AIRLESS TIRE INFORMATION PAGE
UNIVERSAL SCOOTER TIRE AND TUBE SET, 8 inch (200 x 75), 90 Degree
Stem - $SOLD OUT
plus shipping/handling
Quality Front or Rear Use on All ELECTRIC Scooters. Street/turf
tire tread. Actual dimensions 200X75: 7 5/8" diameter, 2 7/8 width,
4 inch diameter center for rim. Uses the 200 X 50 innertube.
Scooter 8 inch (200 x 75) Pneumatic
Scooter Tire $SOLD OUT
plus shipping/handling
High Quality Scooter Tire, Front or Rear Use on All ELECTRIC
SCOOTERS. Actual dimensions: 7 5/8" diameter, 2 7/8 width, 4 inch
diameter center for rim. Uses the 200 X 50 innertube.
Actual dimensions: 8 1/2" diameter, 1.75" width, 4 inch diameter
center for rim
Front or Rear Use on Rad2Go E5 Model and other scooters
This hard to find tire is available while current limited quantity
lasts! Order Now!!! Never have flats again! This is NOT a hard
rubber or plastic tire that will wear out and get flat spots! This
is a soft, but long life tire like automobiles use, filled with new
composite type (replaces foam type) material that has been tested
extensively, a heavy duty tire for both front or rear tire
replacement. The best flat-free tire ever produced for ELECTRIC
SCOOTERS. Rides like pneumatic air filled tires, but won't go flat
or need air ever!!! PRIORITY MAIL DELIVERY IN 2-3 DAYS TO ANY USA
LOCATION, SATURDAY DELIVERY INCLUDED! AIRLESS TIRE INFORMATION PAGE
Tire - 8.5 X 2" Pneumatic Scooter Tire
$7.95
plus shipping/handling
8.5" Scooter Tire For Front or Rear Use. Actual dimensions: 8 1/2"
diameter, 1.75" width, 4 inch diameter center for rim.
Consider our AIRLESS 8 1/2" TIRE when
available!
High Quality 8.5" Tube For Front or Rear Use. Actual dimensions: 8
1/2" diameter, 1.75" width, 4 inch diameter center for rim TIP ON CHANGING A BAD INNERTUBE
Actual Diminsions 8 3/4 inch diameter, 2 1/2 inch width, 4 inch
diameter center for rim. 4 Ply, 30 PSI. For indoor use on scooter
and wheel chairs to prevent marks on floors. Tube available below
Tire - 10 inch
(3.00-4) Front or Rear Scooter Tire (85 PSI) - $15.95
plus shipping/handling
Street tread. Actual dimensions: 10.75 inch diameter, 3.25" width,
4 inch diameter center for rim. Or, replace it with our slightly larger diameter Scooter Tire below that
fits the same rim, yielding almost a 10% increase in speed when
used on the rear wheel if wheelwell and chain clearance is
adequate.
10 inch
(3.00-4), 90 Degree Stem, Heavy Duty Innertube for E10/36, and many
other gas and electric scooters - $7.95
plus shipping/handling
Actual dimensions: 10" diameter, 3.25" width, 4 inch diameter
center for rim. Used in 3.00-4 to 4.10-4 10 inch diameter tires where rear tire requires a right angle stem.
10 inch (3.00-4) Airless Scooter Tire -
OUT OF STOCK Availability of this
item?
Actual dimensions: 10" diameter, 3.25" width, 4 inch diameter
center for rim
Never have flats again! This is NOT a hard rubber or plastic tire
that will wear out and get flat spots! This is a soft, but long
life tire like automobiles use, filled with a composite material
that has been tested extensively, a heavy duty tire for both front
or rear tire replacement. The best flat-free tire ever produced for
ELECTRIC SCOOTERS. Rides like 85 psi pneumatic air filled tires,
but won't go flat or need air ever!!! These tires replace all 3.00-4 10 inch tires used
on many scooters. No warranty. 5 pounds each shipping weight. AIRLESS TIRE INFORMATION PAGE
Tire 10 inch 4.10/3.50-4 - $17.95
plus shipping/handling.
Quality tire in either street or combination (knobby/street tread)
tread. 85 psi high strength wall and tread tires. This Scooter Tire
will also replace the front or rear 10 inch 3.00-4 Scooter Tire for four inch rims
used on the E10 and E36 when used with the 3.00-4 angle stem
innertube. The result is almost a 10% increase in speed when used
on the rear wheel since the circumference is 34 inches versus 31.
Tire 10 inch 4.10/3.50-4
Knobby - $9.95
plus shipping/handling. Reg $17.95.
Great value knobby for scooters and dirt bikes. 30 psi rating, 2
ply tire. This Knobby Scooter Tire will also replace the front or
rear 10 inch 3.00-4 Scooter Tire used on the E10 and E36 when used
with the 3.00-4 angle stem innertube. The result is almost a 10%
increase in speed when used on the rear wheel since the
circumference is 34 inches versus 31.
Tire - 12.5" X 2.50" Rear Heavy Duty
Scooter Tire - $15.95
plus shipping/handling
12.5" 40 PSI Scooter Tire. Deep tread is great for rear use for more traction for braking because of the added width and more tread. Wears longer! This tire fits on rims of 2.25 to 2.75
inch widths. Use 12.5 X 2.25/2.50 tube. USE THE 12 X 3.00 TIRE BELOW IF WIDTH IS NOT A PROBLEM.
Tire - 12.5" X 2.75" Quality Knobby
Scooter Tire $15.95
plus shipping/handling
12.5" Scooter Tire For Front or Rear Use on rims of 2.25 to 2.75
inch widths. Dirt bike tire for rough use, but can be ridden on
streets. Use 12.5 X 2.25/2.50 or 12.5 X 2.50/2.75 tube.
Tire - 12.5" X 3.00" Rear Heavy Duty
Scooter Tire $14.95
plus shipping/handling
12.5" Scooter Tire. Great wearing and much better traction and braking because of the added width. This tire fits on normal rims for 2.25 to 2.75 tires. All you need is the width clearance for the chain and frame of the scooter.
Use 12.5 X 2.25/2.50 tube or mount tubeless on rim with that capability.
Tube, Bent Stem - 16 X 2 1/8 $9.95
plus shipping/handling
16 inch diameter innertube with bent stem to fit tire widths of 1.75-2.50.
Fits many scooters including some X-treme scooter model rear wheels using bent stem.
Tube, Bent Stem - 16 X 3 $14.95 ON SALE!
plus shipping/handling
Our Highest Quality 16 x 3 Bent Right Angle Stem for many X-treme scooter
models rear wheels and other scooters that need a bent stem valve. HARD TO FIND!
WE HAVE MANY MANY OTHER SIZES OF TIRES AND TUBES AVAILABLE
INCLUDING:
10" knobby dirt bike tires, Front and Rear Tire Set for
"CatEye"49cc pocket bike, 14 X 2.5 knobby Dirt bike tire, 3.00-10
scooter tire - DOT approved - 8PR Tire-3.00-10, 16 x 2.4 Knobby
tire - Razor MX500 and 650 front tire, 3.00 x 9 knobby tire - Razor
brand MX500 & 650 Dirt Rocket knobby rear tire, 145/70-6 ATV
Tire - Preferred for rear tread - Good match for 154-28 on front -
Can be used in tube or tubeless installation - Tire-14570-6,
205/30-10 Tire - Street tread, used on rear wheel of some choppers
- Tire-2053010, 120/60-12 tire for Pocket Bikes - Tire-12060-12,
3.50-10 - 4PR tire for scooter - Tire-3.50-10-1, 200 x 75 mm
scooter tire used on some Bladez and other scooters - Tire-20075,
Pocket Bike Tire 110/50-6.5 - Tire-11050, 130/50-10 Pocket Bike
Tire - Tire-13050-10, 120/50x9 Tire for Pocket Bikes -
Tire-12050-9, 120/50x9 Tire for Pocket Bikes - Tire-12050-9,
120/70-10 Pocket Bike Tire - Tire-12070-10, 110/50-6.5 Pocket Bike
Tire. Slick - Tire-11050-6.5, 130/50-8 Tire, X7 Pocket Bike -
Tire-13050-8, 90/65-6.5 Tire used on small pocket bikes -
Tire-9065, 3.00-8 4PR scooter tire - DOT Approved - Tire-3.00-8,
130/60-10 - Pocket Bike Tire - Tire-13060-10, 130/60-10 - Pocket
Bike Tire - Tire-13060-10, 4.10/3.50-6 tire for go-karts and
scooters - Same size as 90/90-6 - Tire-410-350x6, 90/65-8 Tire Fits
many pocket bikes including the X7 - Tire-9065-8, 90/65-8 Tire Fits
many pocket bikes including the X7 - Tire-9065-8, 3.50-8 DOT
Approved Scooter Tire - Tire-3.50-8, 120/90-10 Pocket Bike Tire -
Tire-12090-10, 145/50-10 Pocket Bike Tire - Tire-14550-10, 70/70-12
Tire. Street tread used on some choppers for front wheel -
Tire-7070-12, 90/90x12 Pocket Bike Tire - Tire-9090-12, 145-70x6
Knobby ATV Tire T/L - Tire-14570-6-1, 90/65-10 Pocket Bike Tire -
Tire-9065-10, 145/70-6 tire for ATV - Pattern with center line,
100/60-12 Vento Zip R3I model Rear Tire also fits the Jazz Model
Front and Rear, 100/60-12 Vento Zip R3I model Rear Tire also fits
the Jazz Model Front and Rear, 3.5-10 Knobby BLADEZ Scooter Tire,
Razor E300 Tire, Razor pocket Rocket tire and tube combo, 130/60-13
Scooter Tire, Vento Zip R3I model Front Tire, 3.0-4 Kenda brand
tire for Bladez, Bent Valve Stem for tubeless tire, 13x6.50-6
Pocket Bike Tire, 2.75/3.0-9 Tube. Fits 120/50-9 tire -
Innertube-120-50-9, 120/70-12 Tire
Email for current pricing
PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES. PARTS ARE PROVIDED IN AS-IS CONDITION WITH NO REGARD TO SLIGHT COSMETIC IMPERFECTIONS DUE TO STORAGE OR HANDLING, AND PRODUCTION RUNS MAY SLIGHTLY ALTER THE APPEARANCE OF THE SAME PART FROM TIME TO TIME MAKING SLIGHT DIFFERENCES FOR MATCHING OF SEVERAL ITEMS IN AN ORDER (WHENEVER POSSIBLE WE MATCH AS CLOSELY AS POSSIBLE FOR ORDERS WHERE CUSTOMERS REQUEST THIS). ALL PARTS ARE INSPECTED AND TESTED AS POSSIBLE FOR QUALITY CONTROL PRIOR TO PACKAGING AND SHIPMENT OF CUSTOMER ORDERS. ALL SALES ARE FINAL WITH THE EXCEPTION OF NON-ELECTRICAL ITEM EXCHANGES FOLLOWING OUR TERMS OF SALE ORDER POLICIES FOR THE ORDERING OF INCORRECT PARTS. CUSTOMERS SHOULD ALWAYS TAKE ADVANTAGE OF OUR 24/7 EMAIL AND OTHER COMMUNCIATIONS FOR HELP PRIOR TO PLACING ORDERS, IF NEEDED. USA STANDARD SHIPPING IS INCLUDED IN THE PRICE OF PARTS ONCE ADDED TO THE SHOPPING CART THAT ALSO REPRESENTS THE HANDLING FEE FOR INTERNATIONAL ORDERS. INTERNATIONAL SHIPPING IS SEPARATE FOR EACH ORDER BASED ON INFORMATION PROVIDED ON OUR 'HOW TO PLACE AN ORDER' PAGE USING THE LINK IN THE ITEM DESCRIPTION. USA HANDLING IS ADDED TO EACH ORDER DURING CHECK-OUT TO ADJUST SHIPPING AND PROCESSING OF EACH USA ORDER. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND CUSTOMER WILL BE ADVISED IN THAT EVENT.
A few customers have pinched the innertube in between the tire
rim when replacing a bad tube, causing a hole or rip in the tube.
This happens when you do not partially inflate the tube to get it
out of the way of the two rim halves as you put it together. Just add a little
pressure so the tube fills out and gets out of the way of the rim.
Tighten the tire rim screws or bolts securely and THEN finish
adding the correct tire pressure! Saves a big problem caused by the
rim tightening on the uninflated tube! And in standard larger rims
it also helps prevent problems by adding some pressure as you pull
the final bead of the tire onto the rim using plier handles or spreading
tools. See more tire changing tips.