I've been internet ordering for years
and this has been my best experience!
The order was acknowledged quickly by email and updated
with tracking information. Not only was my order delivered in record
time, you emailed saving me from ordering incorrectly and later helped me with the installation,
too. I received parts that were all pretested and ready to install. Thank you so much for the great service.
Check your email for an order response.
Orders are verified. Tracking information
will be sent at the time of shipment. So please check your
email after ordering for the first email and daily for further emails
with information about your order. Thank you!
DISCOUNT SCOOTERS AND PARTS! SALES SINCE 1988. SEE PHONE NUMBERS AT THE BOTTOM OF THE PAGE
Popular Electric/Gas Scooter Tires and Tubes
TIRES AND TUBE SIZES
ARE LARGER AS YOU
SCROLL DOWN THE PAGE
UNIVERSAL SCOOTER TIRE AND TUBE SET, 8 inch (200 x 50), 90 Degree
Stem $16.95
plus shipping/handling
Quality Front or Rear Use on All ELECTRIC Scooters. Street/turf
tire tread. Actual dimensions 200X50: 7 5/8" diameter, 1 7/8 width,
4 inch diameter center for rim. 36 PSI. Most popular scooter tire
and tube we carry.
Razor Scooter 8 inch (200 x 50)
Quality Pneumatic Scooter Tire and Tube $19.95
plus shipping/handling
High Quality Scooter Tire and tube, Front or Rear Use on All
ELECTRIC SCOOTERS. Actual approximate dimensions: 7 5/8" diameter,
1 7/8 width, 4 inch diameter center for rim.
Quality Front or Rear Use on All ELECTRIC Scooters. Street/turf
tire tread. Actual dimensions 200 X 75: 7 5/8" diameter, 2 7/8 width,
4 inch diameter center for rim. Uses 200 X 50 innertube.
Scooter 8 inch (200 x 75) Pneumatic
Scooter Tire $SOLD OUT
plus shipping/handling
High Quality Scooter Tire, Front or Rear Use on All ELECTRIC
SCOOTERS. Actual dimensions: 7 5/8" diameter, 2 7/8 width, 4 inch
diameter center for rim. Limited Quantity. Uses 200 X 50 Innertube.
Universal Scooter Tire and Tube - 8.5 x
2 Pneumatic Scooter Tire and Tube $14.95
plus shipping/handling
8.5 X 2" Scooter Tire and Tube For Front or Rear Use, Rad2Go Model E5 and other
scooters. Actual physical dimensions: 8 1/2" diameter, 1.75" width,
4 inch diameter center for rim.
Actual Diminsions 8 3/4 inch diameter, 2 1/2 inch width, 4 inch
diameter center for rim. 4 Ply, 30 PSI. For indoor use on scooter
and wheel chairs to prevent marks on floors. Tube available below
10 inch
(3.00-4), 90 Degree Stem, Heavy Duty Innertube for many
gas and electric scooters $7.95
plus shipping/handling
Actual dimensions: 10" diameter, 3.25" width, 4 inch diameter
center for rim. Used in 3.00-4 to 4.10-4 10 inch diameter tires where rear tire requires a right angle stem.
OR Tire 10 inch 4.10/3.50-4 $17.95
plus shipping/handling
Quality tire in either street or combination (knobby/street tread)
tread. 85 psi high strength wall and tread tires. This Scooter Tire
will also replace the front or rear 10 inch 3.00-4 Scooter Tire for four inch rims
used on the E10 and E36 when used with the 3.00-4 angle stem
innertube. The result is almost a 10% increase in speed when used
on the rear wheel since the circumference is 34 inches versus 31.
Tire 10 inch 4.10/3.50-4
Knobby $11.95
plus shipping/handling
Great value knobby for scooters and dirt bikes. 30 psi rating, 2
ply tire. This Knobby Scooter Tire will also replace the front or
rear 10 inch 3.00-4 Scooter Tire used on the E10 and E36 when used
with the 3.00-4 angle stem innertube. The result is almost a 10%
increase in speed when used on the rear wheel since the
circumference is 34 inches versus 31.
Tire - 12.5" X 2.50" Rear Heavy Duty
Scooter Tire - $15.95
plus shipping/handling
12.5" 40 PSI Scooter Tire. Deep tread is great for rear use for more traction for braking because of the added width and more tread. Wears longer! This tire fits on rims of 2.25 to 2.75
inch widths. Use 12.5 X 2.25/2.50 tube. USE THE 12 X 3.00 TIRE BELOW IF WIDTH IS NOT A PROBLEM.
Tire - 12.5" X 2.75" Quality Knobby
Scooter Tire $15.95
plus shipping/handling
12.5" Scooter Tire For Front or Rear Use on rims of 2.25 to 2.75
inch widths. Dirt bike tire for rough use, but can be ridden on
streets. Use 12.5 X 2.25/2.50 or 12.5 X 2.50/2.75 tube.
Tire - 12.5" X 3.00" Rear Heavy Duty
Scooter Tire $14.95
plus shipping/handling
12.5" Scooter Tire. Great wearing and much better traction and braking because of the added width. This tire fits on normal rims for 2.25 to 2.75 tires. All you need is the width clearance for the chain and frame of the scooter.
Use 12.5 X 2.25/2.50 tube or mount tubeless on rim with that capability.
Tube, Bent Stem - 16 X 2 1/8 $9.95
plus shipping/handling
16 inch diameter innertube with bent stem to fit tire widths of 1.75-2.50.
Fits many scooters including some X-treme scooter model rear wheels using bent stem.
If you need help with any issues the first thing we ask you to do is contact us via one of the following methods and we can save you time! We want to help you before extra paperwork and expenses make a possible easy resolution take weeks, or even months to resolve. DO NOT CONTACT PAYPAL! Paypal is only a payment processor and an extra layer of paperwork. You certainly have this option available anytime in the future, but we can help take the correct steps for fastest resolution.
DO read the emails you have received from us because there is instructions for the quickest way to proceed based on the type of order you placed.
This is the FIRST step you should take after realizing there is an issue. Next email reply in that email at the top to tell us what the issue is.
These two simple steps will save everyone time and money!
If you have a technical question there are two ways to proceed. If you ordered an X-treme OEM Part or Scooter you can get free technical support using the X-TREME SUPPORT TICKET SYSTEM where you and a specialist dialog on the website to provide you help and warranty parts support using a ticket number. OEM Parts primarily come from this same location, too, saving time if a part needs replacing. If necessary, email us in reply to the email with the subject line OEM PART ORDER SHIPPING.
If you ordered and received one of our pretested universal parts from our own warehouse then reply to the email we sent with the subject line ORDER SHIPPING.
Feel free to CALL or TEXT MESSAGE us using our Parts
and Scooter Information Hotline at...
TEXT 281-317-7307 or CALL 281-997-6907 FOR GENERAL QUESTIONS Not Answered in our COMMON QUESTIONS FAQ
Or our SALES ONLY Hotline
where we can take Credit Card orders verbally
Note: Verbal Orders are more prone to mistakes so use our Shopping Cart System
1-800-842-1225 ORDER ONLY HELP Monday through Friday
(Phone Order - Or Help using the Shopping Cart System)
High Volume Calls are answered by our
machine and your phone number is logged.
We will call USA customers back when you say CALL ME BACK after the beep!
Best time to call: Mid-Afternoon
Otherwise
EMAIL US for fastest help or if you need a link to a part.
Thanks for shopping with us, we
appreciate your business.
SUMMARY:
We began selling tested parts at a discount, or wholesale
scooter parts, to valued customers who are primarily repairing
customer scooters. Testing each part is necessary to insure parts work properly, saving the need for time and money wasting returns. With our quality tested parts repair shops were quickly able to
repair their own customers scooters, receiving the parts in a few
days at a decent price. Our prices are lower for
tested parts and scooters, and we may still be the only ones testing what we sell, including the tires and tubes sold on this page from our warehouse.
HELP IN MAKING A SELECTION: To find the size of your tire look on the side. All pneumatic
tires are printed with the entire tire Diameter and Width
information in either standard or metric size. We list our tires from the
smaller diameter and rim size at the top of this page and becoming larger
as you scroll down the page. Many scooters have a
wheel rim diameter of 4 inches and it may not be reflected in the
size. If your tire says it is 200 X 50 in metric size then this is
the same as an 8" diameter by 2" width tire (25mm = 1 inch) with a
4 inch diameter hole for the rim. The inner tube is also the same
size. In some cases a tire might be listed for example as a 10 inch
diameter, 2.80-4 or 2.50-4 width, or 2.80/2.50-4 - width of the
tire and a 4 inch diameter rim hole (meaning the rim can accept
widths of either 2.8 or 2.5 inches), or the tire or tube will only
show the 2.80-4 or 2.50-4 on the side of the tire and not the
outside diameter of the tire or tube. If these sizes further state it is a 9 or 10 inch tire or tube then this is the
outside diameter of the tire or tube, usually rounded off to the
nearest inch. The width in inches is the 2.50 or 2.80, and the 4 is
the diameter of the hole for the rim. On the other hand a 3.00-9 Tire size indicates the
width is 3 inches with a rim size of 9 in diameter. A 3.00-10 Tire indicates a
width of 3 inches with a rim size of 10 in diameter. The tire outside diameter is not given! The rim size is the
size of the hole in the center of the tire at 9 or 10 inches rounded off. In some cases we list the
actual physical sizes for the tire, tube, or
wheels in the descriptions for your information and comparison, too. With
this comparative information you should not make a mistake in
ordering the correct size. Some tires are listed with the Scooter brand
or make and model to also help your research. EMAIL US IF YOU ARE IN DOUBT BEFORE YOU ORDER!
SEE OUR TERMS OF SALE, ORDER POLICIES, TO UNDERSTAND HOW TO EXCHANGE!!
WE HAVE MANY MANY SIZES OF TIRES AND TUBES AVAILABLE
INCLUDING:
10" knobby dirt bike tires, Front and Rear Tire Set for
"CatEye"49cc pocket bike, 14 X 2.5 knobby Dirt bike tire, 3.00-10
scooter tire - DOT approved - 8PR Tire-3.00-10, 16 x 2.4 Knobby
tire - Razor MX500 and 650 front tire, 3.00 x 9 knobby tire - Razor
brand MX500 & 650 Dirt Rocket knobby rear tire, 145/70-6 ATV
Tire - Preferred for rear tread - Good match for 154-28 on front -
Can be used in tube or tubeless installation - Tire-14570-6,
205/30-10 Tire - Street tread, used on rear wheel of some choppers
- Tire-2053010, 120/60-12 tire for Pocket Bikes - Tire-12060-12,
3.50-10 - 4PR tire for scooter - Tire-3.50-10-1, 200 x 75 mm
scooter tire used on some Bladez and other scooters - Tire-20075,
Pocket Bike Tire 110/50-6.5 - Tire-11050, 130/50-10 Pocket Bike
Tire - Tire-13050-10, 120/50x9 Tire for Pocket Bikes -
Tire-12050-9, 120/50x9 Tire for Pocket Bikes - Tire-12050-9,
120/70-10 Pocket Bike Tire - Tire-12070-10, 110/50-6.5 Pocket Bike
Tire. Slick - Tire-11050-6.5, 130/50-8 Tire, X7 Pocket Bike -
Tire-13050-8, 90/65-6.5 Tire used on small pocket bikes -
Tire-9065, 3.00-8 4PR scooter tire - DOT Approved - Tire-3.00-8,
130/60-10 - Pocket Bike Tire - Tire-13060-10, 130/60-10 - Pocket
Bike Tire - Tire-13060-10, 4.10/3.50-6 tire for go-karts and
scooters - Same size as 90/90-6 - Tire-410-350x6, 90/65-8 Tire Fits
many pocket bikes including the X7 - Tire-9065-8, 90/65-8 Tire Fits
many pocket bikes including the X7 - Tire-9065-8, 3.50-8 DOT
Approved Scooter Tire - Tire-3.50-8, 120/90-10 Pocket Bike Tire -
Tire-12090-10, 145/50-10 Pocket Bike Tire - Tire-14550-10, 70/70-12
Tire. Street tread used on some choppers for front wheel -
Tire-7070-12, 90/90x12 Pocket Bike Tire - Tire-9090-12, 145-70x6
Knobby ATV Tire T/L - Tire-14570-6-1, 90/65-10 Pocket Bike Tire -
Tire-9065-10, 145/70-6 tire for ATV - Pattern with center line,
100/60-12 Vento Zip R3I model Rear Tire also fits the Jazz Model
Front and Rear, 100/60-12 Vento Zip R3I model Rear Tire also fits
the Jazz Model Front and Rear, 3.5-10 Knobby BLADEZ Scooter Tire,
Razor E300 Tire, Razor pocket Rocket tire and tube combo, 130/60-13
Scooter Tire, Vento Zip R3I model Front Tire, 3.0-4 Kenda brand
tire for Bladez, Bent Valve Stem for tubeless tire, 13x6.50-6
Pocket Bike Tire, 2.75/3.0-9 Tube. Fits 120/50-9 tire -
Innertube-120-50-9, 120/70-12 Tire. Email for current pricing.
NOTICE: PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES. PARTS ARE PROVIDED IN AS-IS CONDITION WITH NO REGARD TO SLIGHT COSMETIC IMPERFECTIONS DUE TO STORAGE OR HANDLING, AND PRODUCTION RUNS MAY SLIGHTLY ALTER THE APPEARANCE OF THE SAME PART FROM TIME TO TIME MAKING SLIGHT DIFFERENCES FOR MATCHING OF SEVERAL ITEMS IN AN ORDER (WHENEVER POSSIBLE WE MATCH AS CLOSELY AS POSSIBLE FOR ORDERS WHERE CUSTOMERS REQUEST THIS). ALL PARTS ARE INSPECTED AND TESTED AS POSSIBLE FOR QUALITY CONTROL PRIOR TO PACKAGING AND SHIPMENT OF CUSTOMER ORDERS. ALL SALES ARE FINAL WITH THE EXCEPTION OF NON-ELECTRICAL ITEM EXCHANGES FOLLOWING OUR TERMS OF SALE ORDER POLICIES FOR THE ORDERING OF INCORRECT PARTS. CUSTOMERS SHOULD ALWAYS TAKE ADVANTAGE OF OUR 24/7 EMAIL AND OTHER COMMUNCIATIONS FOR HELP PRIOR TO PLACING ORDERS, IF NEEDED. USA STANDARD SHIPPING IS INCLUDED IN THE PRICE OF PARTS ONCE ADDED TO THE SHOPPING CART THAT ALSO REPRESENTS THE HANDLING FEE FOR INTERNATIONAL ORDERS. INTERNATIONAL SHIPPING IS SEPARATE FOR EACH ORDER BASED ON INFORMATION PROVIDED ON OUR 'HOW TO PLACE AN ORDER' PAGE USING THE LINK IN THE ITEM DESCRIPTION. USA HANDLING IS ADDED TO EACH ORDER DURING CHECK-OUT TO ADJUST SHIPPING AND PROCESSING OF EACH USA ORDER. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND CUSTOMER WILL BE ADVISED IN THAT EVENT.
A few customers have pinched the innertube in between the tire
rim when replacing a bad tube, causing a hole or rip in the tube.
This happens when you do not partially inflate the tube to get it
out of the way of the two rim halves as you put it together. Just add a little
pressure so the tube fills out and gets out of the way of the rim.
Tighten the tire rim screws or bolts securely and THEN finish
adding the correct tire pressure! Saves a big problem caused by the
rim tightening on the uninflated tube! And in standard larger rims
it also helps prevent problems by adding some pressure as you pull
the final bead of the tire onto the rim using plier handles or spreading
tools. See more tire changing tips.
FOLLOW THESE INSTRUCTIONS FOR ANY ISSUES